4"SCH40 1pc Alum PP CPx22'0"

4"SCH40 1pc Alum PP CPx22'0"This 1pc 4" Schedule 40 aluminum pole is built and shipped as a permanently spliced pole column. The pole section features a zinc plated steel end plug, 1 1 4" diameter hole for lifting, and a zinc plated steel top pin . The top pin is a welded steel assembly with a 0. 847"OD pole pin measuring 12" in length that is capped with a black low density polyethylene end plug. The shipping length of this pole is approximately 23'. Specifications: Base

This fitting is generally used for gable frame widths that are wider than 15' where intermediate legs are often used

The upper door panels are clear and the bottom panels are white blockout

5" round aluminum leg tubing

baseplates

This size is utilized for tent sections such as a 20x20 1pc tent top or two 10x10 tent tops

a 6' mid section

Color: "White"

The tensile strength of this rope is rated with a 3

000lbs and the working load is rated at 3

The fitting hs a 1/4" thumb screw to hold the fitting in place once it is in position

The fitting is finished with a durable zilver zinc plating

The top pin is a friction fit and is installed by hand then hammering into final position with a rubber mallet or by simply tapping on the ground